W ramach naszej witryny stosujemy pliki cookies w celu świadczenia Państwu usług na najwyższym poziomie, w tym w sposób dostosowany do indywidualnych potrzeb. Korzystanie z witryny bez zmiany ustawień dotyczących cookies oznacza, że pliki opisane w Polityce Prywatności będą zamieszczane na Państwa urządzeniu końcowym. W każdej chwili możecie Państwo zmienić ustawienia dotyczące plików cookies w przeglądarce internetowej. Akceptacja niezbędnych plików cookies jest wymagana do prawidłowego działania witryny. Szczegółowe informacje znajdą Państwo w zakładce POLITYKA PRYWATNOŚCI.

Publikacje

Publikacje

2026
  1. Rakoczy Ł., Grudzień-Rakoczy M., Cempura G., Dudziak T., Kargul T., Rząd E., (…), As-cast microstructure, wear and oxidation resistance of Alloy 718+TiC nanocomposites processed via suction casting, Ceramics International (2026), ISSN 0272-8842, doi: 10.1016/j.ceramint.2025.12.240 
  2. Chaves J., Lasanta M.I., Garcia-Martin G., (…), Dudziak T., Perez J., A high-temperature study of hot-rolled and additive-manufactured Ni-based alloys for CSP applications, Journal of Materials Research and Technology (2026), ISSN 2238-7854, doi: 10.1016/j.jmrt.2026.04.074 TOP10%
  3. Barzowska-Gogola A., Staniszewska-Ślęzak E., Budziaszek J., Górska-Ratusznik A., Baliś A., Advancing Label-Free Imaging Through CARS Microscopy: From Signal Formation to Biological Interpretation, Molecular Science (2026), ISSN 1422-0067,  doi: 10.3390/ijms27041990
  4. Rakoczy Ł., Grudzień-Rakoczy M., Cygan R., Cis G., Dudziak T., Rząd E., (…), Characterization of the as-cast microstructure, precipitates stability and corrosion resistance of alloy 718 modified with ex-situ WC nanoparticles, Journal of Alloys and Compounds (2026), ISSN 0925-8388, doi: 10.1016/j.jallcom.2026.187401
  5. Jiao J. Helasen p., Polkowski W., Kateusz F., (…), Development of FeSiB phase change material via aluminothermic reduction for high-temperature thermal energy storage, Journal of Cleaner Production (2026), ISSN 0959-6526, doi: 10.1016/j.jclepro.2025.147317 , TOP10%
  6. Maj Ł., Balin K., Brudecki K., (…), Boroń Ł., Toboła D., Effect of silicate-based/phosphate-based electrolyte on mechanism of incorporation of ZnO nanoparticles into MAO coating fabricated on titanium, Surfaces and Interfaces (2026), ISSN 2468-0230, doi: 10.1016/j.surfin.2025.108284
  7. Maj Ł., Toboła D., Trelka A. (…), Effect of Ag nanoparticles on the tribological response of MAO coatings fabricated on plastically deformed titanium, Wear 2026, Vol. 595, ISSN 0043-1648, doi: 10.1016/j.wear.2026.206689,  TOP10%
  8. Marcjan Ł., Gajoch S., Wilk-Kołodziejczyk D., Małysza M., Jaśkowiec K., Gumienny G., Enhancing Segmentation of Irregular Microstructural Elements Using Extended Channel Information and Transfer Learning, Lecture Notes in Computer Science (2026), ISSN 0302-9743, doi: 10.1007/978-3-032-02088-8_2
  9. Starcevic A., Karpiel I., Kluza M., Starcevic F., Emotions and App-Supported Artificial Intelligence as a Helpful Tool in Psychiatry. Position Paper, Lecture Notes in Computer Science (2026), ISSN 0302-9743, doi: 10.1007/978-3-032-03711-4_44
  10. Płatek P., (…), Polkowski W., Enhancing microstructural and mechanical properties of 316L stainless steel through Material Extrusion (MEX) optimization, Archives of Civil and Mechanical Engineering (2026), ISSN 1644-9665, doi: 10.1007/s43452-026-01519-0
  11. Rakoczy Ł., Grudzień-Rakoczy M., Cempura G., Dudziak T., Kargul T., Chulist R., Rząd E., Górny M., Exploring solidification behavior, strength and steam oxidation resistance of the René 125 nickel-based superalloy with a high-volume fraction of intermetallic γ’ phase, Intermetallics (2026), ISSN 0966-9795, doi: 10.1016/j.intermet.2025.109025
  12. Bętkowska A., Podsiadlo M., Polkowska A., Polkowski W., High-temperature mechanical properties of highly porous Hastelloy-X nickel superalloy, Materials Letter (2026), ISSN 0167-577X, doi: 10.1016/j.matlet.2026.140240
  13. Golański G., Jagielska-Wiaderek K., Dudziak T., Intergranular corrosion resistance of HR3C heat-resistant austenitic stainless steel after long-term aging at 700 °C temperature, Advances in Science and Technology Research Journal (2026), ISSN 2299-8624, doi: 10.12913/22998624/218878
  14. Charzewska K., Adamek J. Kateusz F., Piątek J., Zając W., Levulinic acid as a sustainable and selective leaching agent for hydrometallurgical recycling of commercial Li-ion batteries: Towards greener critical metal recovery, Separation and Purification Technology (2026), ISSN 0304-4165, doi: 10.1016/j.seppur.2025.135196 , TOP10%
  15. Kateusz F., Bisztyga Szklarz M., Bik M., Morgiel K., Morgiel J., Mechanisms of promoted β-SiC crystallisation in pyrolyzed phenyl formaldehyde/methylphenyl siloxane composites, Open Ceramic (2026), ISSN 2666-5395, doi: 10.1016/j.oceram.2026.100966
  16. Naughton-Duszova A., (…), Klimczyk P., Microstructure characterization of spark plasma sintered Al2O3-ZrO2-WC composite, Ceramics International (2026), ISSN 0272-8842, doi: 10.1016/j.ceramint.2026.01.144
  17. Rakoczy Ł., Grudzień-Rakoczy M., Cempura G., (…),
    Microstructure, phase transformation temperatures and long-term stability of ex-situ Alloy 718 + TiB2 metal-ceramic nanocomposites as a repair coating for aerospace applications    , Scientific Reports (2026), ISSN 2045-2322, doi: 10.1038/s41598-025-290049-4
  18. Li J., Klimczyk P., Rumiantseva Y., Wu Y., Phase transformation and densification of cBN-Y2O3 nanocomposites by high pressure and high temperature, Journal of the European Ceramic Society (2026), ISSN 0955-2219, 2(46), doi: 10.1016/j.jeurceramsoc.2025.117770
  19. Ratajczak-Wrona W., Aniszewska A., Pucelik B., (…), “Protective” Imazalil vs Its Negative Effects on Immune System Cells—Neutrophils, Life (2026), ISSN 2075-1729, doi: 3390/life16020365 , TOP10%
  20. Jakubiec J., Topór-Kamiński T., Type A and B errors as a basis for determining the uncertainty of algorithms for processing of measurement data series, Advances in Science and Technology Research Journal (2026), ISSN 2299-8624, doi: 12913/22998624/215460
  21. Rakoczy Ł., Grudzień-Rakoczy M., Cempura G., Kargul T., Rząd E., DudziakT., Toboła D., Beake Ben D., Maj Ł. (…), TiN, CrN and TiCrN coating architectures on M2 steel: consequences for wear and micro-impact resistance, Surface and Coating Technology (2026), ISSN 0257-8972, doi: 10.1016/j.surfcoat.2025.133143 ,  TOP10%
  22. Trzos S., Orzechowska S., Link-Lenczowski P., Sokołowski G., Baranska M., Screening of biomarkers in autoimmune thyroid diseases (AITDs): preliminary study based on Raman spectroscopy and MALDI-ToF mass spectrometry, Biochimica et Biophysica Acta – General Subjects (2026), ISSN 0304-4165, doi: 10.1016/j.bbagen.2025.130883
  23. Lewandowska H., Świsłocka R., (…), Orzechowska S., Towards the Development of Effective Antioxidants—The Molecular Structure and Properties—Part 2, Molecules (2026), ISSN 1420-3049, doi: org/10.3390/molecules31040720
  24. Rakoczy Ł., Grudzień-Rakoczy M., Cygan R., Dudziak T., Rząd E., Chrzan K., (…), Solidification behavior, wettability, steam oxidation resistance and strength of the intermetallic-strengthened cast IN713C Ni-based superalloy, Journal of Materials Research and Technology (2026), ISSN 2238-7854, doi: 10.1016/j.jmrt.2026.03.105

  25. Król M., Stoch P., Kedzierska J., Wons W., Thermal behavior and structural evolution of Cs- and Sr-exchanged clinoptilolite: Implications for radionuclide immobilization, Journal of the European Ceramic Society (2026), ISSN 0955-2219, doi: 10.1016/j.jeurceramsoc.2026.118266

  26. Kariminejad A., Auriemma F., Antonov M., Klimczyk P., Hussainova I., Wear resistance analysis of duplex interpenetrating ceramic composites via in-situ vibration monitoring, (2026), ISSN 0958-0611, doi: 10.1016/j.ijrmhm.2025.107454
  1. Rakoczy Ł., Pajor K., Kozień D., Grudzień-Rakoczy M., Cygan R., Alloy 625+TiB2 Composites Fabricated via Suction Casting – Microstructure and Selected Properties, Materials Science Forum – Conference Paper (2025), ISSN 0255-5476, pp. 109 – 114, doi: 4028/p-PbKGM2
  2.  Karpiel I., Sobotnicka E., Starcevic A.,. Application of Artificial Intelligence in Psychiatric Neuroimaging: A Systematic Review. In: Ladyzynski, P., Pijanowska, D.G., Liebert, A. (eds) Joint 20th Nordic-Baltic Conference on Biomedical Engineering & 24th Polish Conference on Biocybernetics and Biomedical Engineering. NBC PCBBE 2025 2025. IFMBE Proceedings, vol 131. Springer, Cham, doi: 10.1007/978-3-031-96538-8
  3. Kwiecień K., Putyra P., Kaczor A., At-line determination of the enantiomeric excess in multi-component chiral samples using Raman optical activity (ROA), Analytica Chimica Acta (2025), ISSN 0003-2670, doi: 1016/j.aca.2025.344727
  4. Kluza M., Karpiel I., Duch K., Komorowski D., Sieciński S.; An Assessment of the Freshness of Fruits and Vegetables Through the Utilization of Bioimpedance Spectroscopy (BIS)—A Preliminary Study, Foods (2025), ISSN 2304-8158, doi: 3390/foods14060947 , TOP 10%
  5. Bitka A., Witkowski M., Jaśkowiec K., Małysza M., Marcjan Ł., Wilk-Kołodziejczyk D., Analysis of the possibility of using exploration and learning algorithms in the production of castings, Archives of Civil and Mechanical Engineering (2025), ISSN 1644-9665, doi: 1007/s43452-024-01089-z
  6. Marthinsen A., Gaweł B.A., Warden G.K., Górska – Ratusznik A., Gaweł K., Di Sabatino M., Hallam B., Al doped silica glass: investigation of structural response and defect interactions based on crystalline models, Physical Chemistry Chemical Physics (2025), ISSN 1463-9076, 27 (7), pp. 3803 – 3809, doi: 1039/d4cp04581e
  7. Janiszewska U., Marcjan Ł., Gajoch S., Jaśkowiec K., Bitka A., Małysza M., Wilk-Kołodziejczyk D., Analysis of the Possibility of Using Selected Artificial Intelligence Algorithms for the Assessment of the Microstructure of Vermicular Cast Iron, Archives of Foundry Engineering (2025), ISSN 1897-3310, 25(2), pp.173 – 182, doi: 24425/afe.2025.153807
  8. Raus-Jarząbek E., (…), Czerw M., A Practical Guide to ECG Device Performance Testing According to International Standards, Elecytronics (2025), ISSN 2079-9292, doi: 10.3390/electronics14193878

  9. Sobotnicka E., Nowak G. J., Mocha J., Gałecka J., Kaczmarek M., A review of tumor ablation applicators and their role in irreversible electroporation therapy, Volume 29, Issue 3, doi: 10.13174/pjambp.29.12.2025.03.

  10. Syrek K., Wierzbicka E., Zych M., Piecha D., Szczerba M., Sołtys-Mróz M., Kapusta-Kołodziej J., Sulka G., Band gap engineering of tungsten oxide-based nanomaterials, Journal of Photochemistry and Photobiology C: Photochemistry Reviews (2025), ISSN 1389-5567, doi: 1016/j.jphotochemrev.2024.100681, TOP 10%
  11. Chuchnowska I., Mikulska J., Burkacki M., Chmura M., Chrzan M., Kalinowski J., Suchoń S., Ples M., Sobiech M., Szaflik P., Zadoń H., Watoła B., Comparative Analysis of Passive Movement During Robot-Assisted and Therapist-Led Rehabilitation Exercises, Sensors (2025), ISSN 1424-8220, doi: 3390/s25175334
  12. Smajdor J., Fendrych K. Górska-Ratusznik A., Carbon Materials in Voltammetry: An Overview of Versatile Platforms for Antidepressant Drug Detection, Micromachines (2025), ISSN 2072-666X, 16 (4), doi: 3390/mi16040423
  13. Richter-Laskowska M., Sobotnicka E., Bednorz A., Cognitive performance classification of older patients using machine learning and electronic medical records, Scientific Reports (2025), ISSN 2045-2322, 15(1), doi: 1038/s41598-025-90460-y   TOP 10% 
  14. Rogal Ł., Kobylarz Z., (…), Klimczyk P.., Podsiadło M., (…), Crystallization of CuZrAgAl Bulk Metallic Glass at Various Temperatures and Pressures (2025), ISSN 1733-3490, 3(70), doi: 10.3390/s25175334
  15. Wang, Richter M., Zhu X., Pedrycz W., Gacek A., Sobotnicki A., Detecting Characteristic Points for the Analysis of Bioimpedance Signal Through a Synergy of Fuzzy Rule-Based Models and Granular Neural Networks, IEEE Transactions on Fuzzy Systems (2025), ISSN 1063-6706, doi: 10.1109/TFUZZ.2024.3454335 , TOP 10%
  16. Kulyk V.V., Duriagina Z.A., Klimczyk P., Vavrukh V.I., Podsiadło M., Momot K., Vasyliv B.D., Kovbasiuk T.M., Determination of fracture toughness of zirconia–based ceramics produced by the spark plasma sintering method, Materials Science (2025), ISSN 1068-820X, 60 (5), doi: 1007/s11003-025-00925-8
  17. Rumiantseva Y., Laszkiewicz-Łukasik J., Podsiadło M., Chat-Wilk K., Momot K., Boroń Ł., Klimczyk P., Development of two-layer whisker-reinforced PcBN materials for cutting tool applications, Ceramics International (2025), ISSN 0272-8842, v 51 (1), doi: 10.1016/j.ceramint.2024.11.107
  18. Sobotnicka E., Mocha J., Nowak G. J., Badura G., Sobotnicki A., Dziuda Ł., Digital Measurement Modules for Non-invasive Monitoring of Physiological Parameters Under Extreme Conditions, IFMBE Proceedings Conference Paper (2025), ISBN 978-303196537-1, 131, pp. 329 – 342, doi: 1007/978-3-031-96538-8_29
  19. Wilk-Kołodziejczyk D., Nowotny A., Krzak I., Tchórz A., Jaśkowiec K., Małysza M., Bitka A., Głowacki M., Książek M., Marcjan Ł., Development of a model for detection and analysis of inclusions in tomographic images of iron castings using decision trees, Scientific Reports (2025), ISSN 2045-2322, 15 (1), doi: 1038/s41598-025-86005-y
  20. Polkowski W., Zhong Lo B. Paolo Lai , Jiao J., Wallin M., Polkowska A., Kateusz F., Tangstad M., Designing new ultra-high temperature phase change materials from the Fe-Si-B system for thermal energy storage density above 1 MWh/m3, Materials and Design (2025), ISSN 0264-1275, doi: 1016/j.matdes.2025.114958 , TOP 10%
  21. Kariminejad A., Kumar R., Antonov M., Hussainova I., Klimczyk P., Erosive wear of spark plasma sintered Al2O3 – cBN ceramic composites, Diamond and Related Materials (2025), ISSN 0925-9635, v.155, doi: 1016/j.diamond.2025.112328
  22. Lavrys S., Tkachuk O., Pohrelyuk I., Morgiel K., Toboła D.,Morgiel J., Effect of combined strengthening heat treatment with gas nitriding on microstructural evolution of VT22 titanium alloy, Journal of Alloys and Compounds (2026), ISSN 0925-8388, 1047, doi: 1016/j.jallcom.2025.184770 , TOP 10%
  23. Kluszczyński M., Karpiel I., Piechaczek A., Evaluation of the use of an antigravity device in leveling functional inequalities of the lower limbs and inhibiting the progression of idiopathic scoliosis, Advances in Clinical and Experimental Medicine (2025), ISSN 1899-5276, V.34 (5), pp. 737 – 746, doi:  17219/acem/191598
  24. Hyjek K., Dymek K., Kurowski G., Boguszewska-Czubara A., Wnorowska S., Pajdak A., Kuterasinski Ł., Piskorz W., Gancarczyk A., Iwaniszyn M., Cubi A., Khalavka M., Jodłowski P.J., Enhancing lung cancer treatment with metal–organic frameworks, Microporous and Mesoporous Materials (2025), ISSN 1387-1811, v.395, doi: 1016/j.micromeso.2025.113665
  25. Gajoch S., Marcjan Ł., Witkowski M., Bitka A., Jaśkowiec K., Małysza M., Wilk-Kołodziejczyk D., Exploration and Learning Algorithms Used for Predicting Casting Properties, Lecture Notes in Computer Science (2025), ISSN 0302-9743, V.15909 LNCS, pp. 261 – 275, doi: 1007/978-3-031-97564-6_21
  26. Borges S.H., Pasini W. M., Dainezi I., Vilela V., Polkowski W., Chaia N., Mariano Neide A.a, Effects of Chromium and Aluminum Additions on High-Entropy Alloys of the NbTiCrAl System: Development and Characterization, Materials Research (2025), ISSN 1516-1439, v.28, doi: 10.1590/1980-5373-mr-2025-0105
  27. Momot K., Klimczyk P., Leszczyńska-Madej B., Podsiadło M., Rumiantseva Y., Gubernat A., From Powders to Performance—A Comprehensive Study of Two Advanced Cutting Tool Materials Sintered with Pressure Assisted Methods, Materials 2025, 18(2), ISSN 1996-1944; doi: 10.3390/ma18020461
  28. Kariminejad A., Klimczyk P., Antonov M., Hussainova I., From scrap to product: the effect of recycled tungsten carbide and alumina content on the mechanical properties of oxide-carbide duplex ceramic composite, Proceedings of the Estonian Academy of Sciences (2025), ISSN 1736-6046, 74 (2), doi: https://dea.digar.ee/article/AKproceedings/2025/05/0/63
  29. Gubernat A., Klimczyk, Pasierb P., Rutkowski P., Kornaus K., Lach R., Kulczyk-Malecka J., Morgiel J., High-pressure sintered polycrystals from Ti-coated cBN powders: Microstructure, mechanical properties and thermo-electrical characteristics, Journal of the European Ceramic Society (2025), ISSN 0955-2219, Volume 45, Issue 11, doi: 10.1016/j.jeurceramsoc.2025.117393
  30. Kadela K., Oleś H., Kosowska K., Liberda-Matyja D., Wiatrowska W., Cader K., Grabowska N., Piana K., Tott S., Roman M., Kozioł-Bohatkiewicz P., Wróbel T.P., High-resolution infrared imaging performance of new high numerical aperture Schwarzschild objectives, Spectrochimica Acta – Part A: Molecular and Biomolecular Spectroscopy (2025), ISSN 13861-425, doi: 1016/j.saa.2025.125769
  31. Kateusz F., Polkowska A., Chrzan K., Polczyk T., Serafin D., Pawlik S., Dudziak T., Jedliński J., High temperature corrosion mechanism of flame sprayed coatings in H2O, CO2and SO2: a case for recycled, mixed 316L/Z100 steels, Surface and Coatings Technology (2025), ISSN 0257-8972, doi: 1016/j.surfcoat.2025.132914, TOP 10%
  32. Toboła D., Drenda C., Chandran P., Morgiel J., Kot M., Polkowska A., Brostow W., Influence of sequential pre-processing on the structural and tribo-mechanical properties of Vancron 40 tool steel, Wear (2025), ISSN 0043-1648, Volume 580-581, doi: 1016/j.wear.2025.206307, TOP 10%
  33. Grudzień-Rakoczy M., Rakoczy Ł., Cempura G., Chrzan K., Żuczek R., Oleksy W., Cygan R., Insight into the solidification behavior of the C101 Ni-based superalloy fabricated through vacuum lost-wax casting, International Journal of Advanced Manufacturing Technology (2025), ISSN 0268-3768, V. 137 (5), pp. 2697 – 2711, doi: 1007/s00170-025-15307-2
  34. Toboła D., Chandran P., Morgiel J., Maj Ł., Drenda C., Korzyńska K., Łętocha A., Microstructural dependence of tribological properties of Ti-6Al-4V ELI alloy after slide burnishing / shot peening and low-temperature gas nitriding, Surface and Coatings Technology (2025), ISSN 0257-8972, doi: 1016/j.surfcoat.2025.131941, TOP 10%
  35. Kasprzycki J., Stan-Głowińska K., (…), Klimczy P., (…), Mechanically activated TiN nano-powders consolidated by spark plasma sintering and high-pressure methods, Journal of Materials Research and Technology (2025), ISSN 3895-3906, Vol.37, doi: 10.1016/j.jmrt.2025.06.217
  36. Karpiel I., Mysiński M., Olesz K., Kluza M., Czerw M., Monitoring of Respiratory Parameters as a Factor Supporting the Improvement of the Efficiency of Exercisers – Case Study, Lecture Notes in Networks and SystemsConference Paper (2025), ISBN 978-303182142-4, v. 1202 LNNS, pp. 121 – 128, doi: 1007/978-3-031-82143-1_13
  37. Jóźwik P., Polkowski W., Panas A.J., Bojar Z., Microstructure Evolution of Ni3Al-Based Intermetallic Alloy Strips After Hot Rolling, Materials (2025), ISSN 1996-1944, v.18 (13), doi: 3390/ma18133016
  38. Ksiazek M., Boroń Ł., Microstructure, Tribological, and Corrosion Behavior of HVOF-Sprayed (Cr3C2-NiCr+Ni) Coatings on Ductile Cast Iron, Materials (2025), ISSN 1996-1944, v. 18 (8), doi: 3390/ma18081856
  39. Polkowski W., Biundo, P., Jiao J., Wallin M., Kalicki B.,Ciftci J., Żrodowski Ł., Polkowska A., Bętkowska A., Kateusz F., Tangstad M., Micro-encapsulation of Si-Fe ultra-high temperature phase change material: Fabrication and basic energy storage properties, Results in Engineering (2025), ISSN 2590-1230, v. 25, doi: 1016/j.rineng.2025.104191
  40. Morgiel J., Klimczyk P., Lach R., Gubernat A., Microstructure and phase composition of Ti-coated cBN powders intended for active coating technology (ACT) processes, Applied Surface Science (2025), v.680, ISSN 0169-4332, doi: 1016/j.apsusc.2024.161378
  41. Bętkowska A., Podsiadło M., Polkowska A., Włoch G., Polkowski W., Microstructure and mechanical properties of highly porous Hastelloy-X nickel superalloy produced by a space holder approach, Scientific Reports (2025), v. 15 (581), ISSN 2049-2322, doi: 10.1038/s41598-024-84321-3, TOP 10%
  42. Rakoczy Ł., Grudzień-Rakoczy M., Cempura G., Kargul T., Rząd E., Madej M., Dudziak T., Kozień D., Cygan R., Graboś A., Galusek D., Microstructure and resultant properties of ex-situ Alloy 625+TiB2 nanocomposites processed via suction casting as filler material for Ni-based superalloys repair applications, Journal of Materials Research and Technology (2025), v. 38, ISSN: 2214-0695 doi: 10.1016/j.jmrt.2025.08.032
  43. Pasini W.M., Polkowski W., Dudziak T., dos Santos C.A., Karlinski de Barcellos V., Microstructure Formation and Dry Reciprocating Sliding Wear Response of High-Entropy Hypereutectic White Cast Irons, Metals (2025), 15 (1), ISSN: 2075-4701, doi: 10.3390/met15010004
  44. Rakoczy Ł., Grudzień-Rakoczy M., Cempura G., Kargul T., Rząd E., Madej M., Dudziak T., Kozień D., Cygan R., Galusek D., Microstructure, stability and oxidation resistance of ex-situ Alloy 625 + TiC nanocomposites processed by suction casting intended for repair of aerospace components, Materials and Design (2025), ISSN 0264-1275, doi: 1016/j.matdes.2025.114055, TOP 10%
  45. Andrejovská J., Medveď D., Vojtko M., Sedlák R., Klimczyk P., Dusza J., Mechanical Properties and Tribological Behavior of Al2O3–ZrO2 Ceramic Composites Reinforced with Carbides, Lubricants (2025), v. 13 (7), ISSN 2075-4442, doi:  3390/lubricants13070310
  46. Zhydachevskyy, Y., Stasiv, V., Poshyvak, O., Ubizskii, S., Pawłowska, Z., Rumiantseva, Y., Baran, M., Zhydachevska, H., Berkowski, M., Suchocki, A., New high-Z detectors based on YAlO3:Bi3+ for joint use with tissue equivalent BeO in tandem OSL dosimeter, Scientific Reports (2025), ISSN 2045-2322, v. 15 (1), doi: 1038/s41598-025-05285-6,
  47. Karpiel, I., Mysiński, M., Olesz, K., Czerw, M., Overview of Respiratory Sensor Solutions to Support Patient Diagnosis and Monitoring, Sensors (2025), ISSN 1424-8220, 25 (4), doi: 3390/s25041078
  48. Komenda A., Piątek J., Prussian blue analogues in sodium-ion batteries: comparison with lithium technologies, recent advances, and prospects, Renewable and Sustainable Energy Reviews (2025), ISSN 1364-0321, v 217 doi: 10.1016/j.rser.2025.115677, TOP 10% Scopus
  49. Hyjek K., Dymek K., Kurowski G. (…), Reviving the Fight against Opioid Overdoses: Unleashing the Power of Metal–Organic Frameworks for Morphine Removal, ACS Applied Materials and Interfaces (2025), ISSN 1944-8244, doi: 1021/acsami.5c19297, TOP 10% Scopus
  50. Kariminejad A., Antonov M., Klimczyk P., Hussainowa I., Surface fatigue behaviour of duplex ceramic composites under high-frequency impact loading within situ accelerometric monitoring, Crystals (2025), ISSN 2073-4352, 3390/cryst15121036
  51. Pasini W.M., Borges S.H., Kateusz F., Rząd E., Chaia N., Mariano N.A., Polkowski W., Synthesis, microstructure, growth kinetics and oxidation performance of complex concentrated silicide coatings on Nb₇Ti₇Al₁Cr₁ via hot-dip siliconizing, Open Ceramics (2025), ISSN 2666-5395, doi: 1016/j.oceram.2025.100810
  52. Grudzień-Rakoczy M., Rakoczy Ł., Cempura G., Dudziak T., Rząd E., Chrzan K., Cygan R., Solidification behavior of René 77 nickel-based superalloy produced via vacuum lost-wax casting and its resultant microstructure, strength and oxidation resistance, Scientific Reports (2025), ISSN 2045-2322, 15 (1), doi: 1038/s41598-025-02664-x
  53. Dymek K., Mazur M., Kurowski G., Pajdak A., Sawoszczuk T., Kuterasiński Ł., Szumera M., Jeleń P., Sitarz M., Piskorz W., Jodłowski P.J., Sonication-Assisted Synthesis of CuPd-HKUST-1 Catalysts for Cyclohexene Oxidation, The Journal of Physical Chemistry C (2025), Vol 129/Issue 18, ISSN 1932-7447, https://pubs.acs.org/doi/10.1021/acs.jpcc.5c00385.
  54. Spiewak M., Piątek J., Rodrigues B.V.M., Slabon A., Sustainable recycling of lithium-ion batteries: Pipe dream or realistic solution, Cell Reports Sustainability (2025), ISSN 2949-7906, v.2 (7), doi: 1016/j.crsus.2025.100429
  55. Rumiantseva Y., Lysovenko S., Grzechnik A., Wachnicki L., Polczyk T., Pienizek A., Gawron M., Klimczyk P., Zhydachevskyy Y., Synthesis of MgAl2O4 Spinel in MgO-Al2O3 and MgO-Al2O3-Al Systems via HPHT Sintering, Acta Physica Polonica A (2025), ISSN 0587-4246, 147 (6), doi: 12693/APhysPolA.147.456
  56. Przygucka D., Polkowska A., Polkowski W., Karczewski K., Jóźwiak S., Titanium Oxide Formation in TiCoCrFeMn High-Entropy Alloys, Materials (2025), ISSN 1996-1944, v. 18 (2), doi: 3390/ma18020412
  57. Kulyk V.V., (…), Klimczyk P., The influence of spark plasma sintering parameters on the microstructure, physical, and mechanical properties of ZrO2–3 mol% Y2O3ceramics, Archives of Materials Science and Engineering (2025), ISSN 1897-2764, doi: 5604/01.3001.0055.2855
  58. Lo Biundo P. L. Z., Jiao J., Wallin M., Polkowska A., Nowak R., Bruzda G., Kudyba A., Kateusz F., Bętkowska A., Tangstad M., Polkowski W., Thermophysical properties of eutectic Fe-57Si ultra-high-temperature metallic phase change material, Journal of Thermal Analysis and Calorimetry (2025), ISSN 1388-6150, v. 150(13), doi: 1007/s10973-025-14332-3
  59. Sobotnicka E., Mocha J., Badura G., Sobotnicki A., Dziuda Ł., The Concept of an Innovative System for Monitoring Physiological Parameters Under Extreme Conditions, Electronics (Switzerland) (2025), ISSN 2079-9292, 14 (5), doi: 3390/electronics14050889
  60. Jaworska L., Stępień M., Witkowska M., Skrzekut T., Noga P., Podsiadło M., Tyrała D., Konstanty J., Kapica K., Thermal Barrier Coating on Diamond Particles for the SPS Sintering of the Diamond–ZrO2 Composite, Materials (2025), ISSN 1996-1944, 18 (4), doi: 3390/ma18040869
  61. Sobotnicka, E., Mocha, J., Gałecka, J., Sobotnicki, A., Ultrasound Blood Flow Monitoring as One of the Elements of a Assessing the Ability for Pilots to Fly – Preliminary Study, Lecture Notes in Networks and Systems Conference Paper (2025), ISBN 978-30318214-2-4, pp. 153 – 160, doi: 1007/978-3-031-82143-1_17
  62. Pędzich, Z., Wilmański, A., Wojteczko, A., Komarek, S., Kozień, D., Klimczyk, P., Zirconium dioxide/tungsten carbide composite – influence of sintering technique on phase composition and microstructure, Composites Theory and Practice (2025), ISSN 2084-6096, doi: 62753/ctp.2025.03.1.1
  1. Grudzień-Rakoczy M., Rakoczy Ł., Lech S., Dudziak T., Rząd E., Goły M., Paćko M., Chrzan K., Cygan R., Poletti C., Al- and Ta-Modified Alloy 740 Superalloy Castings Produced in Non-vacuum Conditions—Microstructure and Selected Properties, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2024), 10(55),m pp. 3839 – 3858, ISSN 1543-1940,  doi: 10.1007/s11661-024-07504-7
  2.   Małysza M., Żuczek R., Wilk-Kołodziejczy D., Jaśkowiec K., Bitka A., (…), Pysz. S. †, Application of a 3D-Printed Part with Conformal Cooling in High-Pressure Die Casting Mould and Evaluation of Stress State During Exploitation, Materials (2024), ISSN 1996-1944, doi: 10.3390/ma17235988
  3. Lehrfeld A., Jaśkowiec K., Wilk-Kołodziejczyk D., Małysza M., Bitka A., (…), Analysis of the Possibility of Making a Digital Twin for Devices Operating in Foundries, Electronics (2024), ISSN 2079-9292, 2(13), doi: 10.3390/electronics13020349
  4. Kluszczyński, M., Zaborowska-Sapeta, K., Kowalski, I., & Karpiel, I., An Innovative Method for the Conservative Treatment of Idiopathic Scoliosis Using the GraviSpine Device According to the Concept of Spinal Reflex Balance, Journal of Clinical Medicine (2024), 13(14), 4044. doi: 10.3390/jcm13144044
  5. Żaba K., Gracz D., (…), Tchórz A., Application of X-Ray Computed Tomography to Identify Defects in Lost Wax Ceramic Moulds for Precision Casting of Turbine Blades, Materials (2024), ISSN 1996-1944, doi: 10.3390/ma17205088

  6. Sobotnicka E., Mocha J., Sobotnicki A., Dziuda Ł., A System for Measuring Physiological Parameters During Extreme Activities, 31st International Conference Mixed Design of Integrated Circuits and System MIXDES’2024, 27–28 June 2024, Gdańsk, Poland, in: Tylman W. (ed.), IEEE Proceedings No. CFP24MIX-CDR, pp. 281–285, doi: 10.23919/MIXDES62605.2024.10613981.

  7. Warszyńska M., Pucelik B., Vinagreiro S., Repetowski P., Barzowska A., at all, Better in the Near Infrared: Sulfonamide Perfluorinated-Phenyl Photosensitizers for Improved Simultaneous Targeted Photodynamic Therapy and Real-Time Fluorescence Imaging, ACS Applied Materials & Interfaces (2024), ISSN 1944-8244, doi: 1021/acsami.4c11171, TOP 10%
  8. Passini W., Polkowska A., Nowak R., Bruzda G., Kudyba A., (…), Polkowski W., Boron Enhanced Complex Concentrated Silicides – A bridge between lightweight, oxidation-resistant Refractory Metal Silicides and Refractory Complex Concentrated Alloys, Next Materials (2024), ISSN 2949-8228, doi: 10.1016/j.nxmate.2023.100052
  9. Urzeniczok M., Karpiel I., Bioimpedance spectroscopy – Modern applications, Lecture Notes in Networks and Systems (2024), 875, 241-248, ISSN 2367-3370, doi: 1007/978-3-031-52382-3_27
  10. Kepa T., Dudziak T., Rząd E., Troncy R., Boissonnet G., Polkowska A., Kateusz F., (…), Comparison of diffusion coatings resistance on ferritic and austenitic-stainless steels at 650o in steam oxidation, Surface and Coatings Technology (2024), 489, ISSN 0257-8972, doi: 10.1016/j.surfcoat.2024.131089, TOP 10%
  11. Osipov A., Klimczyk P., (…), Rumiantseva Y., Binderless Polycrystalline Cubic Boron Nitride Sintered Compacts for Machining of Cemented Carbides, Ceramics (2024), ISSN 2571-6131, doi: 10.3390/ceramics7040095
  12. Jodłowski P.J., Dymek K., i in., Crystal Clear: Metal-Organic Frameworks Pioneering the Path to Future Drug Detox, Applied Materials & Interfaces (2024), ISSN 1944-8244,
    doi: 10.1021/acsami.4c02450,  TOP 10%
  13. Szlezynger M., Toboła D., Morgiel J., Deposition of NiAl/AlN3Ni2(CrB2) Coatings from Ni, Al and CrB2 Powders Using Mechanical Synthesis in Planetary Ball Mill, Materials (2024), ISSN 1996-1944, 17, 492, doi: 10.3390/ma17020492
  14. Szczupak E., Małysza M., Wilk-Kołodziejczyk D., Jaśkowiec K., Bitka A., Głowacki M., Marcjan Ł., Decision suport tool in the selection of powder for 3D printing, Materials (2024), 8(17), ISSN 1996-1944, doi: 10.3390/ma17081873
  15.  Wang D., Richter M., Zhu X., Pedrycz W., Gacek A., Sobotnicki A., Li Z., Detecting Characteristic Points for the Analysis of Bioimpedance Signal Through a Synergy of Fuzzy Rule-based models and Granular Neural Networks, IEEE Transactions on Fuzzy Systems, (2024), pp1-10, early access, doi: 10.1109/TFUZZ.2024.3454335; TOP 10%
  16. Malicki S., Czarna A., Żyła E., Pucelik B., (…), Development of selective ssDNA micro-probe for PD1 detection as a novel strategy for cancer imaging, Scientific Reports (2024), ISSN 2045-2322, TOP10%
  17.  Amorim A., Arnaut Z., Mata A., Pucelik B., Barzowska A., (…), Efficient and Selective, In Vitro and In Vivo, Antimicrobial Photodynamic Therapy with a Dicationic Chlorin in Combination with KI, ACS Infections Diseases (2024), 9(10), ISSN 2373-8227, doi: 10.1021/acsinfecdis.4c00492
  18. Fendrych K., Górska-Ratusznik A., Smajdor J., Electromechanical assays for the determination of antidiabetic drugs- A review, Micromachines (2024), 15, 10, ISSN 2072-666X, doi: 10.3390/mi15010010
  19. Gajda A., Pajdak A., (…), Dymek K., Effective heat transfer associated with Co2 and CH4 adsorption on HKUST-1 metal-organic framework deposited in situ on heat exchanger, Energy (2024), 307, ISSN 0360-5442, doi: 10.1016/j.energy.2024.132525, TOP 10%
  20. Kedzierska M., Sala K., Bankosz M., Grzela K., (…), Enhanced Hydrogel Materials: Incorporating Vitamin C and Plant Extracts for Biomedical Applications, Molecules (2024), 29, ISSN 1420-3049, doi: 10.3390/molecules29112633
  21. Kluszczyński M., Karpiel I., Piechaczek A., Evaluation of the use of an antigravity device in leveling functional inequalities of the lower limbs and inhibiting the progression of idiopathic scoliosis, Advances in Clinical and Experimental Medicine (2024), 34(5), ISSN 1899–5276 , doi: 10.17219/acem/191598, TOP 10%
  22. Roth J.P., Sulak I., Kruml T., Polkowski W., Establishing a Novel Process Route for Additive Manufacturing of NiCu-Based Alloy 400 – an Alignment of Gas Atomization, Laser Powder Bed Fusion and Design of Experiments, The International Journal of Advanced Manufacturing Technology (2024), ISSN 1433-3015, doi: 10.1007/s00170-024-14328-7 
  23.  Stratiichuk D.A., Devin L.M., Richev S.V., Turkevich V.Z., Rumiantseva Y., , Effect of wSiC and wSi3N4 Whiskers on the Ultimate Dynamic Tensile Strength of cBN Composites from the BL Group, Journal of Superhard Materials (2024), ISSN 1063-4576, doi: 10.3103/S1063457624040117
  24. Sadlik J., (…), Bruzda G., Jampilek J., Gradient Titanium Alloy with Bioactive Hydroxyapatite Porous Structures for Potential Biomedical Applications, Materials (2024), ISSN 1996-1944, doi: 10.3390/ma17225511
  25. Polkowska A., Rząd E., Podsiadło M., Bętkowska A., Polkowski W., Highly Porous Hastelloy-X Nickel Superalloy Produced by a Space Holder Approach: Oxidation Behavior at 1000° C, High Temperature Corrosion of Materials 103 (3), 43, doi: 10.21203
  26. Rasouli A., Kudyba A., Bruzda G., Safarian J., Tranell G., High-Temperature reactive wetting of natural quartz by liquid magnesium, Materials (2024), 6(17), ISSN 1996-1944, doi: 10.3390/ma17061302
  27. Dudziak T., Chandran P., Nowak B., Verma B., High-Temperature Steam Oxidation Behavior of VDM Alloy 699 XA Produced by Laser Powder Bed Fusion, Journal of materials Engineering (2024), ISSN 1059-9495, doi: 10.1007/s11665-024-09882-w
  28. Maj P., Sitek R., Ciftci J., Adamczyk-Cieslak B., Tchórz A., Wisniewski P., Impact of rhenium addition on microstructural characteristics and mechanical performance in Powder Bed Fusion-Laser Beam produced Inconel 625 alloy, Archives of Civil and Mechanical Engineering Close (2024), ISSN 1644-9665, doi: 10.1007/s43452-024-00901-0
  29. Karpiel I., Kluza M., Sobotnicki A., Identification and Optimization of Landmarks on the Impedance Cardiography Signal ICG, 2024 31st International Conference on Mixed Design of Integrated Circuits and System (MIXDES), Gdansk, Poland, 2024, pp. 294-298, doi: 10.23919/MIXDES62605.2024.10613995
  30. Wu Q., Tao Y., Dudziak T., (…), Influence of TiC addition on high-temperature oxidation in rich pO2 atmosphere on Cr-rich stainless steel, Materials Corrosion (2024), ISSN 0947-5117; 1(75), 9-17,
    doi: 10.1002/maco.202313872
  31.  Kateusz F., Baciak F., Bisztyga-Szklarz M., Podsiadło M., Putyra P., Insights into the high-temperature degredation mechanism of the methylpolysiloxane-B4C composite, Materials Letters (2024), 360, ISSN 0167-577X, doi: 10.1016/j.matlet.2024.136028
  32. Richter-Laskowska M., Wawrzkiewicz-Jałowiecka A., Bies A., Trybek P., Machine learning methods for the analysis of the patch-clamp signals, Methods in molecular biology (2024), 2796, 249-270, ISSN 1940-6029, doi: 10.1007/978-1-0716-3818-7_15
  33. Mocha J., Badura G., Nowak G., Sobotnicki A., Kostka P., Modular architecture of an electroporation device with a hardware and software safety system, Przeglad Elektrotechniczny (2024), 10, ISSN 0033-2097, doi: 10.15199/48.2024.10.52
  34. Morgiel J., Dudziak T., Rząd E., Morgiel K., Kateusz F., Morphology and microstructure of Yb2O3 layer formed over aluminide coating produced by pack cementation of Haynes 263 alloy, Archives of Civil and Mechanical Engineering (2024), ISSN 1644-9665, 2(24), doi: 10.1007/s43452-024-00869-x
  35. Rakoczy Ł., Grudzień-Rakoczy M., Cygan R., Kargul T., Zielińska-Lipiec A., Microstructure and selected properties of the solution heat-treated MAR-M247 Ni-based superalloy fabricated via directional solidification, International Journal of Advanced Manufacturing Technology (2024), ISSN 0268-3768, 3-4(130), 1321-1339, doi: 10.1007/s00170-023-12785-0 
  36. Sobiech M., Michnik A., Chuchnowska I., Karpiel I., Wolański W., Multivariate Analysis of the Kinematics of an Upper Limb Rehabilitation Robot, Acta of Bioengineering and Biomechanics, (2024), ISSN 2450-6303, https://doi.org/10.37190/abb-02386-2024-02
  37. Bukowska A., Charzewska K., Chat-Wilk K., Rokicińska A., (…), Piątek J., Ni-CoP catalyst for efficient and robust NaBH4 hydrolysis, International Journal of Hydrogen Energy (2024), ISSN 0360-3199, 18(63), 308-314, doi: 10.1016/j.ijhydyne.2024.03.175, TOP 10% 
  38. Łętocha A., Putyra P., Podsiadło M., Momot K., Klimczyk P., Toboła D., New method for assessing discontinuities of the surface layer based on the surface roughness measurements,  Journal of Achievements in Materials and Manufacturing Engineering (2024), 1(124), ISSN 1734-8412, doi: 10.5604/01.3001.0054.7226
  39. Haraźna K., Grzela K., Stępień-Hołubczat K., (…), Novel, eco-friendly α-tocopherol/layered double hydroxides/poly(3-hydroxyoctanoate)-based active packaging materials with enhanced antimicrobial, barrier and antioxidant activities, Chemical Engineering Journal (2024), 500, ISSN 1385-8947, doi: 10.1016/j.cej.2024.156959,  TOP 10%
  40. Sajdak M., (…), Momot K., Golis E., Zych Ł., Gubernat A., Processing, Microstructure and Mechanical Properties of TiB2-MoSi2-C Ceramics, Crystals (2024), ISSN 2073-4352, doi: 10.3390/cryst14030212
  41. Haraźna K., Fricker A., Konefał R., i inni, Physicochemical, structural and biological characterisation of poly(3-hydroxyoctanoate) supplemented with diclofenac acid conjugates – Harnessing the potential in the construction of materials for skin regeneration processes, International Journal of Biological Macromolecules (2024), 268, ISSN 0141- 8130, doi: 10.1016/j.ijbiomac.2024.131476, TOP 10%
  42. Szymański Ł., Sobczak J.J., (…), Bruzda G., Sobczak N., Production of metal matrix composite reinforced by TiC by reactive infiltration of cast iron into Ti+C preforms, Ceramics International (2024), ISSN 0272-8842, doi: 10.1016/j.ceramint.2024.02.233
  43. Sobotnicka E., Karpiel I., Sobiech M., Review of innovative virtual reality solutions supporting the rehabilitation of Covid-19 patients, in: Gzik M., Paszenda Z., Piętka E., Tkacz E., Milewski K., Jurkojć J. (eds), Innovations in Biomedical Engineering 2023, Lecture Notes in Networks and Systems (LNNS), Springer, Cham, Vol. 875, 2024, pp. 68–76, doi: 10.1007/978-3-031-52382-3_8.
  44. Kateusz F., Polkowska A., Chat-Wilk K., Chrzan K., Serafin D., Pawlik S., Dudziak T., Jedliński J., Steam oxidation of thermally deposited coatings from 304L and recycled 316 L/Z100 steels: Influence of temperaturę, coatings microstructure and steel recycling, Surface & Coatings Technology (2024), doi: 10.1016/j.surfcoat.2024.131478, TOP 10%
  45. Repetowski P., Warszyńska M., Kostecka A., Pucelik B., Barzowska A., Emami A., Ümit İşci, Dumoulin F., Dąbrowsk J.M., Synthesis, Photo-Characterizations, and Pre-Clinical Studies on Advanced Cellular and Animal Models of Zinc(II) and Platinum(II) Sulfonyl-Substituted Phthalocyanines for Enhanced Vascular-Targeted Photodynamic Therapy, ACS Applied Materials & Interfaces (2024), 37(16), ISSN 1944-8244, doi: 10.1021/acsami.4c04138,  TOP 10%  
  46. Pasini W.M., Polkowska A., Boroń Ł., Podsiadło M., Rząd E., Bruzda G., Kudyba A., Nowak R., Górniewicz J., Dworecka-Wójcik D., Łazińska M., Karczewski K., Polkowski W., Synthesis of complex concentrated silicide coatings via reactive melt-infiltration: Exploring interfacial phenomena between Si-B melt and MoNbTaW high-entropy alloy, Surface and Coatings Technology (2024), ISSN 0257-8972, doi: 10.1016/j.surfcoat.2024.131401, TOP 10%
  47. Rumiantseva Y.Y., Polczyk T., Lyvosenko S.O., Synthesis of Magnesium–Aluminum Spinel at High Pressures and High Temperatures in the Mg2B2O5–Al, MgO–Al2O3, and MgO–Al2O3–Al Systems, Journal of Superhard Materials (2024), ISSN 1063-4576, doi: 10.3103/S106345762406008X
  48. Kluszczyński, M.; Zaborowska-Sapeta, K.; Kowalski, I.; Karpiel I., The Effectiveness of Early Rehabilitation in Limiting the Progression of Idiopathic Scoliosis. J. Clin. Med. (2024), 13, 1422, EISSN 2077-0383, doi: 10.3390/jcm13051422
  49. Gubernat A., (…), Klimczyk P., Podsiadło M., The influence of sintering additives on densification and phase composition of ZrB2 – HfB2 composite, Journal of the European Ceramic Society (2024), 14(44), ISSN 0955-2219, doi: 10.1016/j.jeurceramsoc.2024.116685
  50. Edvardsen L., (…), Gaweł K., The role of elelectrical current mode in calcium carbonate deposition on conductive carbon nanofiber-epoxy coating, Journal of Applied Polymer Science (2024), ISSN 0021-8995, doi: 10.1002/app.55152
  51.  Rakoczy Ł., Grudzień-Rakoczy M., Cygan R., (…), The role of the microstructural changes druring induction preheating on the H|AZ liquation cracking susceptibility of Ni-based superalloy, Journal of Materials Science (2024), ISSN 0022-2461, 2(59), 631-649, doi: 10.1007/s10853-023-09184-x
  52. Doniec R., (…), Karpiel I., Urzeniczok M., (…), The detection of alcohol intoxication using electrooculography signals from smart glasses and machine learning techniques, Systems and Soft Computing (2024), ISSN 2772-9419, 6, doi: 10.1016/j.sasc.2024.200078
  53. Karpiel I., Urzeniczok M., Sobotnicka E., Bioimpedance Spectroscopy—Niche Applications in Medicine: Systematic Review, in: Strumiłło P., Klepaczko A., Strzelecki M., Bociąga D. (eds), The Latest Developments and Challenges in Biomedical Engineering, PCBEE 2023, Lecture Notes in Networks and Systems, Vol. 746, Springer, Cham, 2024, doi: 10.1007/978-3-031-38430-1_24.
  54. Karpiel I., Urzeniczok, M., Sobotnicka, E., Gaździński, S., Kowalczuk, K., Dziuda, Ł. (2024). The Use of GIFT Toolbox in the Process of Assessing Physiological Changes in the Brain Induced by Lower Body Negative Pressure (LBNP) Training – Preliminary Studies, Lecture Notes in Networks and Systems (2024), vol 875, ISSN 2367-3389, doi: /10.1007/978-3-031-52382-3_22
  55. Sobotnicka E., Mocha J., Gałecka J., Sobotnicki A., Ultrasound blood flow monitoring as one of the elements of assessing the ability for pilots to fly – preliminary study, in: Gzik M., Paszenda Z., Piętka E., Tkacz E., Milewski K., Jurkojć J. (eds), Innovations in Biomedical Engineering 2024, Lecture Notes in Networks and Systems (LNNS), Vol. 1202, Springer, Cham, 2024, doi: 10.1007/978-3-031-82143-1_17.
  1. Jaśkowiec K., Pirowski , Głowacki M., Bisztyga-Szklarz M., Bitka A., Małysza M., Wilk-Kołodziejczyk D., Analyze the wear mechanism of the longwall shearer haulage system, MateriaIs (2023), ISSN 1996-1944, 8(16), doi: 10.3390/ma16083090
  2. Szatkowski , Wilk-Kołodziejczyk D., Jaśkowiec K., (…), Bitka A., Głowacki M., Analysis of the Possibility of Using Selected Too/s and Algorithms in the Classification and Recognition of Type of Microstructure, Materials (2023), ISSN 0925-9635, 16(21), 6837, doi: 10.3390/ma16216837
  3. Rakoczy Ł., Grudzień-Rakoczy , Cygan R., (…), Maj Ł., Zielińska-Lipiec A., Analysis of the As-Cast Microstructure and Properties of the Ni-Based Superalloy MAR-M247• Produced Via Directional Solidification, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science (2023), ISSN 1073-5623, 54(9), pp. 3630-3652, doi: 10.1007/s11661-023-07123-8
  4. Trybek , Sobotnicka E., Wawrzkiewicz-Jałowiecka A., Machura Ł., Feige O., Sobotnicki A., Richter-Laskowska M., A new method of identifying characteristic points in the impedance cardiography signal based on empirical mode decomposition, Sensors (2023), 2(23), ISSN 1424-8220, doi: 10.3390/s23020675 , TOP 10%
  5. Michnik , Sobiech M., Wołoszyn J., Urzeniczok M., Sobotnicki A., Kowolik R., Cygoń K., ARM-200 – Upper limb rehabilitation robot, Lecture Notes in Networks and Systems (2023), 409, pp. 341-349, ISSN 2367-3370, doi: 10.1007/978-3-030-99112-8_34 ,  TOP 10%
  6. Pasini M., Polkowska A., Nowak R., (…), Karczewski, K., Polkowski W., Boron Enhanced Complex Concentrated Silicides – New pathway for designing and optimizing ultra-high temperature intermetallic composite materials, Journal of Materials Research and Technology (2023), ISSN 2238-7854, 27, pp. 6182-619, doi: 10.2139/ssrn.4485554
  7. Sun , Yang X., Lei V., (…), Dudziak T., Fan R., Core-shell structural design and microwave absorption enhancement of multi-dimensional graphene oxide@polypyrrole/carbonyl iron fiber nanocomposites, Journal of Alloys and Compounds (2023), ISSN 0925-8388, doi: 10.1016/j.jallcom.2022.167446
  8. Kateusz , Polkowska A., Polkowski W., (…), Dudziak T., Jedliński J., Chemistry and microstructure of duplex stainless-steel powders from recycled Z100 mixed with 316L steels, Archives of Civil and Mechanical Engineering (2023), ISSN 1644-9665, 23(4), 246, doi: 10.1007/s43452-023-00782-9
  9. Ye Q., Li X., Tayyebi M., Assari A.H., Polkowska A., Lech S., Polkowski W., Tayebi M., Effect of heat treatment parameters on microstructure evolution, tensile strength, wear resistance, and fracture behavior of Ni-Ti multilayered composites produced by cross-accumulative roll bonding, Archives of Civil and Mechanical Engineering (2023), 1(23), ISSN 1644-9665, doi: 10.1007/s43452-023-00782-9
  10. Sulima , Hyjek P., Podsiadło M., BoczkaI S., Effect of zirconium diboride and titanium diboride on the structure and properties of 316L steel-based composites, Materials (2023), 1(16), ISSN 1996-1944, doi: 10.3390/ma16010439
  11. Dudziak , Buzolin R., Rzad E., (…), Arneitz S., Polkowska A., Effect of 316L Stainless Steel Fabrication on Oxidation Resistance, Surface Morphology, and Hot Tensile Behavior, Journal of Materials Engineering and Performance (2023), ISSN 1059-9495, 32(22), pp. 10443-10454, doi: 10.1007/s11665-023-08321-6
  12. Bochechka O.O., Kushch O.V., Lsonkin O.M., (…), Borymskyi O.I., Rumiantseva, V.V., Effect of The Granular Composition Of Diamond Powder Synthesized in The Mg-Zn-C System On The Structure, Physicomechanical Properties, and Performance Characteristics of Crystals Sintered from Lt Under High Pressure, Journal of Superhard, Materials (2023), ISSN 1063-4576 45(5), Pp. 336-347, doi: 3103/S1063457623050027
  13. Margiel , Dudziak T., Maj L., Kirchner A., Kloden B., Weissgarber T., Rząd E., Pomorska M., Tobola D., Effect of TiAINbCrSi alloy microstructure produced by mould casting (MC) or electron beam powder bed Fusion (EB-PBF) on scale grown under dry air and steam, Metallurgical and Materials Transactions: A (2023), ISSN 1073-5623, doi: 10.1007/s11661-023-07091-z, TOP 10%
  14. Rahmani R., Karimi J., Kamboj N., Kumar R., Brojan M., Tchórz , Skrabalak G., Lopes S.I., Fabrication of localized diamond-filled copper structures via selective laser melting and spark plasma sintering, Diamond and Related Materials (2023), ISSN 0925-9635, 136, doi: 10.1016/j.diamond.2023.109916
  15. Richter-Laskowska , Trybek P., Delfino D., Flavonoids as modulators of potassium channels, International Journal of Molecular Sciences (2023), 24, ISSN 1422-0067, doi: 10.3390/ijms24021311
  16. Boissonnet , Rząd E., Troncy R., Dudziak T., Pedraza F., High temperature oxidotion of enamel coated low-alloyed steel 16Mo3 in water vapor, Coatings (2023), 13, ISSN 2079-6412, doi: 10.3390/coatings13020342
  17. Rahmani R., Karimi J., Kamboj N., Kumar R., Brojan M., Tchórz , Skrabalak G., Lopes S., Fabrication of localized diamond-filled copper structures via selective laser melting and spark plasma sintering, Diamond and Related Materials (2023), ISSN 0925-9635, 136, doi: 10.1016/j.diamond.2023.109916
  18. Buzolin , Masswohl M., Ferraz F., Chrzan K., Dudziak T., Polletti M., Hot deformation mechanism of dual phase high entropy alloys, Materials Science and Engineering: A (2023), ISSN 0921-5093, doi: 10.1016/j.msea.2023.145235
  19. Górska-Ratusznik A., Różańska , Smajdor, J., Paczosa-Bator B., Piech, R., Highly Sensitive Voltammetric Method for Quinoline Yellow Determination on Renewable Amalgam Film Electrode, Molecules (2023), ISSN 1420-3049, 28(14), 5475, doi: 10.3390/molecules28145475
  20. Boissonnet , Rzad E., Troncy R., Dudziak T., Pedraza F., High Temperature Oxidation of Enamel Coated Low-Alloyed Steel 16Mo3 in Water Vapor, Coatings (2023), ISSN 2079-6412, 13(2), 342, doi: 10.3390/coatings13020342
  21. Palumbo G., Górny M., Bitka A., Influence of the cooling rate on mechanical and corrosion properties of ferritic Si-Mo ductile cast iron, Metallurgical and Materials Transactions A: Psychical Metallurgy and MateriaIs Science (2023), ISSN 1073-5623, doi: 1007/s11661-023-07023-x , TOP 10%
  22. Zwolinski , Łętocha A., Cyboroń J., Noga P., Skrzetut T., Podsiadło M., Lis Ł., Jaworska L., Boczkal G., Influence of the high-pressure w-Zr phase on selected properties of sintered zirconium powder materials, International Journal of Refractory Metas and Hard Materials (2023), 110, ISSN 0263-4368, doi: 10.1016/j.ijrmhm.2019.04.018, TOP 10%
  23. Cygan-Bączek , Cygan, S., Wyżga P., (…), Lapcak L., Romański A., lmprovement in Abrasive Wear Resistance of Metal Matrix Composites Used for Diamond-lmpregnated Tools by Heat Treatment, Materials (2023), ISSN 19961944, 16(18), 6198, doi: 10.3390/ma16186198
  24. Pasini M., Pereira L., Bitka A., Chrzan K., (…), dos Santos C.A., de Barcellos V.K., lmproving the Wear Resistance of High Chromium Cast Iron through High Entropy Alloys Concepts and Microstructure Refinement, Materials Research (2023), ISSN 1516-1439, doi: 10.1590/1980-5373-mr-2023-0278
  25. Karpiel , Influence of the reorientation Junction on brodmann areas detection efficiency, Lecture Notes in Networks and Systems (2023), 409, pp. 267-277, ISSN 2367-3370, doi: 10.1007/978-3-030-99112-8_27
  26. Dudziak , Rząd E., Margiel J., Kirchner A., Polczyk T., Moskal G., Kłodon B., Weissgarber T., Tobola D., Wójcicki M., Influence of o rich sulphur atmosphere on the phase development and kinetic behaviour of differentially processed RNT650y-TiAI alloys; Journal of Materials Research and Technology (2023), 23, pp. 1753-1760, ISSN 0263-4368, doi: 10.1016/j.jmrt.2023.01.120
  27. Kwiatkowski , Marczyk J., Putyra P., (…), Przybyła S., Hebda M., Influence of Alumina Grade on Sintering Properties and Possible Application in Binder Jetting Additive Technology, Materials (2023), ISSN 1996-1944, 16(10), 3853, doi: 10.3390/ma16103853
  28. Zwolinski , Letocha A., Cyboron J., (…), Jaworska L., Boczkal G., Influence of the high-pressure ω – Zr phase on selected properties of sintered zirconium powder materials, International Journal of Refractory Metals and Hard Materials (2023), ISSN 0263-4368, doi: 10.1016/j.ijrmhm.2022.106036
  29. Richter-Laskowska , Kurpas M., Maśka M.M., Learning by confusion approach to identification of discontinuous phase transitions, Physical Review E (2023), ISSN 2470-0045, 108(2),024113, doi: 10.1103/PhysRevE.108.024113
  30. Buzoli H., Masswohl M., Ferraz F., Chrzan K., Dudziak T., (…), Microstructure refinement of cast high entropy al/oy by thermomechanical treatments, Materials Science and Engineering: A, ISSN 1873-4936, 872, doi: 10.1016/j.msea.2023.144931, TOP 10%
  31. Liu, , Tayyebi, M., Assari, A.H., (…), Lech, S., Polkowski W., Microstructure, Texture and Tensile Properties of Nickel/Titanium Laminated Composites Produced by Cross Accumulative Roll Bonding Process, Metals and Materials International (2023), ISSN 1598-9623, 29(12), pp. 3630-3644, doi: 10.1007/s12540-023-01461-3
  32. Wilk-Kołodziejczyk, D., Małysza M., Jaśkowiec K., Bitka A., Głowacki, M., Modification of Casting Production Parameters in Order to Obtain Products with the Assumed Parameters with Using Machine Learning, International Journal of Metalcasting (2023), ISSN 1939-5981, 17(4), pp. 2680-2688, doi: 10.1007/s40962-023-01076-9
  33. Polkowski W., Bruzda G., Polkowska A., (…), Książek M., Karczewski K., Microstructural characteristics and mechanical properties of Si-8 alloys for functional and structural ultra-high temperature applications, Journal of Alloys and Compounds (2023), ISSN 09258388, doi: 10.1016/j.jallcom.2022.167672
  34. Machura Ł., Wawrzkiewicz-Jałowiecka A., Richter-Laskowska M., Trybek P., Non-monotonie complexity of stochastic model of the channel gating dynamics, Entropy (2023), ISSN 1099-4300, 3(25), doi: org/10.3390/e25030479 , TOP10%
  35. Urzeniczok , Michnik A., Pilarski K., Karpiel I., Non-lnvasive Bioimpedance Spectroscopy Device Performing Periodic Measurements of Chest Hydration – Model Development, Mixed Design of Integrated Circuits and System, Conference Proceedings, ISBN 978-836357824-4, doi: 10.23919/MIXDES58562.2023.10203253
  36. D’Urso, , Leski, J.M., OWA-based robust fuzzy clustering of time series with typicality degrees, lnformation Sciences (2023), ISSN 0020-0255, doi: 10.1016/j.ins.2023.119706
  37. Wawrzkiewicz-Jałowiecka , Lalik A., Lukasiak A., Richter-Laskowska M., Trybek P., Ejfler M., Opałka M., Wardejn S., Delfino D., Potassium channels, glucose metabolism and glycosylation in cancer celIs, International Journal of Molecular Sciences (2023), ISSN 1422-0067, 24(9), doi: 10.3390/ijms24097942
  38. Kumar , Kariminejad A., Antonov M., (…), Klimczyk P., Hussainova I., Progress in Sustainable Recycling and Circular Economy of Tungsten Carbide Hard Metal Scraps for lndustry 5.0 and Onwards, Sustainability (2023), ISSN 2071-1050, 15(16),12249, doi: 10.3390/su151612249
  39. Nowakowska M., Borek-Dorosz A., (…), Marzec K.M., Reliable cell preparation protocol for Raman imaging to effectively differentiate norma/ leukocytes and leukemic blasts, Spectrochemica Acta A: Molecular and Biomolecular Spectroscopy (2023), ISSN 1386-1425, 292, doi:10.1016/j.saa.2023.122408 , TOP 10%
  40. Czabanski, , Jezewski, M., Leski, J., (…), Martinek, R., Barnova, K., Horoba K., Wróbel J., Refining the rule base of fuzzy classifier support the evaluation of fetal condition, Applied Soft Computing (2023), ISSN 1568-4946, doi: 10.1016/j.asoc.2023.110790
  41. Margiel J., Dudziak , Maj L., (…), Weissgarber T., Tobola D., Role of nitrogen during dry-air oxidation of TiAlNbCrSi alloy produced with mould casting (MC) and electron beam melting (EBM), Archives of Metallurgy and Materials (2023), ISSN 1733-3490 ,68(3), pp. 1183-1189, doi: 10.24425/amm.2023.145492
  42. Alcicek C., Blat A., Rutkowska W., Bułat K., Szczęsny-Małysiak E., Franczyk-Zarow M., Kostogrys R., Dybas J., Marzec K.M., Secondary structure alterations of RBC assessed by FTIR-ATR in correlation to 2,3 – DPG levels in ApoE/LDLR -I-Mice, Spectrochimica Acta – Part A: Molecular and of Civil and Mechanical Engineering (2023), ISSN 1644-9665, 1(23), doi: 10.1007/s43452-022-00550-1, TOP 10%
  43. Rodrigues V.M., Bukowska A., Opltz S., (…), Slabon A., Piątek J., Selective electrochemical recoveries of Cu and Mn from end-of-life Li-ion batteries, Resources, Conservation and Recycling (2023), ISSN 0921-3449, doi: 10.1016/j.resconrec.2023.107115
  44. Stepanenko T., Zając G., Czajkowski A., Rutkowska W., Górecki A., Marzec K.M., Dybas J., Sulfhemoglobin under the spotlight – detection and characterization of SHb and HbFeIII– SH, Biochimica et Biophysica Acta – Molecular Cell Research (2023), 1(1870), ISSN 0167-4889, doi: 1016/j.bbamcr.2022.119378, TOP 10%
  45. Wilk-Kołodziejczyk , Pirowski Z., Bitka A., Wróbel K., Śnieżyński B., Doroszewski M., Jaśkowiec K., Małysza M., Selection of casting production parameters with the use of machine learning and data supplementation methods in order to obtain products with the assumed parameters, Archives of Civil and Mechanical Engineering (2023), ISSN 1644-9665, doi: 10.1007/s43452-022-00598-z, TOP 10%
  46. Górny , Gondek Ł., Angella G., Tyrała E., Kawalec M., Bitka A., Structural stability of thin-walled austempered ductile iron castings, Archives of Civil and Mechanical Engineering (2023), 2(23), ISSN 1644-9665, doi: 10.1007/s43452-022-00597-0
  47. Kamińska J., Stachowicz M., Puzio S., Angrecki M., Studies of mechanical and technological parameters and evaluation of the role of lustrous carbon carriers in green moulding sands with hybrid bentonite, Archives of Civil and Mechanical Engineering (2023), ISSN 23(1), doi: 1007/s43452-022-00550-1
  48. Stepanenko, T., Sofińska, K., Wilkosz, N., (…), Lipiec, E., Marzec, M., Surface-enhanced Ramon scattering (SERS) and tip-enhanced Raman scattering (TERS) in label-free characterization of erythrocyte membranes and extracellular vesicles at the nano-scale and molecular level; Analyst (2023), ISSN 0003-2654, 149(3), pp. 778-788, doi: 10.1039/D3AN01658G
  49. Stepanenko T., Zając G., Czajkowski , (…), Marzec K.M., Dybas J., Sulfhemoglobin under the spotlight – detection and characterization of SHb and HbFeIII-SH, Biochimica et Biophysica Acta – Molecular Cell Research (2023), ISSN 01674889, 1870(1),119378, doi: 10.1016/j.bbamcr.2022.119378
  50. Cygan-Bączek , Romański A., Strengthening Mechanisms and Retention Properties of Sintered lron-Based Matrix Material for Metallic-Diamond Tools, MateriaIs (2023), ISSN 1996-1944, 16(15), 5307, doi: 10.3390/ma16155307
  51. Buzolin R.H., Masswohl M., Ferraz F., Chrzan K., Dudziak , Polett M.C., Thermomechanical treatments for a dual phase cast high entropy alloy, Journal of Alloys and Compounds (2023), ISSN 0925-8388, 956, doi: 10.1016/j.jallcom.2023.170310, TOP 10%
  52. Dudek P., Białoń J., Piwowońska J., Walczak W., Wrzała K., The impact of the cast of making high pressure die castings with multi-cavity die and vacuum assistance, Vacuum (2023), 210, ISSN 0042-207X, doi: 10.1016/j.vacuum.2023.111859 , TOP 10%
  53. Rakoczy Ł., Grudzień-Rakoczy , Rutkowski B., Cygan R., Hanning F., (…), The role strengthening phases on the HAZ liquation cracking in cast Ni-based superalloy used in industrial gas turbines, Archives of Civil and Mechanical Engineering (2023), ISSN 1644-9665, 23:119, doi: 10.1007/s43452-023-00659-x
  54. Rumiantseva, V.V., Lysovenko, S.O., Turkevych, V.Z., (…), Klymenko, A., Turkevych, D.V., The Role of Microfibers and liquid Aluminum in the Reaction between Boran Nitride and Tantalum Nitride, Journal of Superhard MateriaIs (2023), ISSN 1063-4576, 45(6), pp. 415-417, doi: 10.3103/S1063457623060096
  55. Smajdor, , Jedlińska, K., Porada, R., (…), Baś, B., Strus, M., Górska-Ratusznik A., The impact of gut bacteria producing long chain homologs of vitamin K2 on colorectal carcinogenesis, Cancer Cell International (2023), ISSN 1475-2867, 23(1), 268, doi: 10.1186/s12935-023-03114-2
  56. Buzolin H., Masswohl M., Ferraz F.M.B., (…), Dudziak T., Poletti M.C., Thermomechanical treatments for a dual phase cast high entropy alloy, Journal of Alloys and Compounds (2023), ISSN 09258388, doi: 10.1016/j.jallcom.2023.170310
  57. Starcevic , Vucinic B., Karpiel I., Training Set Preparation for Deep Model Learning in patients with Ischemic Brain Lesions and Gender ldentity Disorder, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics) (2023), ISSN 03029743, ISBN 978-303142507-3, 14126 LNAI, pp. 176-191, doi: 10.1007/978-3-031-42508-0_17
  58. Karpiel , Olesz K., Mysinski M., (…), Sobotnicki A., Czerw M., The use of an lnductive Sensor in the Assessment of Respiratory System Efficiency During Exercise – Preliminary Study, Mixed Design of Integrated Circuits and System (2023), Source type, Conference Proceedings, ISBN 978-836357824-4, doi: 10.23919/MIXDES58562.2023.102032577
Kontakt

Dział Komunikacji i Promocji

e-mail: promocja@kit.lukasiewicz.gov.pl

tel. +48 12 26 18 289

[ninja_form id=17]

This will close in 0 seconds

This will close in 0 seconds